0
0
- Home
- Technique Categories
Technique Categories
Product Listing
-
-
Product PartDescription:
Replacement filters for In-line HPLC/UHPLC Precolumn Filters and Direct Connect HPLC/UHPLC Precolumn Filters. Replacement filter for 226-50001-79.
OUT OF STOCKReplacement filters for In-line HPLC/UHPLC Precolumn Filters and Direct Connect HPLC/UHPLC Precolumn Filters. Replacement filter for 226-50001-79.
-
Product PartDescription:
Frit Porosity: 2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 2.1 µL (0.062" dia.), 5.2 µL (0.125" dia.), 11.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads
OUT OF STOCKFrit Porosity: 2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 2.1 µL (0.062" dia.), 5.2 µL (0.125" dia.), 11.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads
-
Product PartDescription:
Frit Porosity: 2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 2.1 µL (0.062" dia.), 5.2 µL (0.125" dia.), 11.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads
OUT OF STOCKFrit Porosity: 2 micron Pressure Rating: 18,000 PSI (0.062" dia. and 0.125" dia.), 10,000 PSI (0.188" dia.) Dead Volume: 2.1 µL (0.062" dia.), 5.2 µL (0.125" dia.), 11.3 µL (0.188" dia.) Frit Material: 316 Stainless Steel Port: 10-32 Port (1/16" CPI) Male Threads: 10-32 Threads
-
Product PartDescription:
Pressure rated up to 25,000 psi (1,720 bar) Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over; Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK) The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
OUT OF STOCKPressure rated up to 25,000 psi (1,720 bar) Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over; Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK) The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
-
Product PartDescription:
Pressure rated up to 25,000 psi (1,720 bar) Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over; Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK) The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
OUT OF STOCKPressure rated up to 25,000 psi (1,720 bar) Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over; Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK) The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
-
Product Part -
Product PartDescription:
2 x PFA fitting 2.3 mm OD 2 x PFA fitting 3.2 mm OD 1 x PP tube connector 5.0 - 11.5mm ID 1 x GL14 connection for exhaust filter
OUT OF STOCK2 x PFA fitting 2.3 mm OD 2 x PFA fitting 3.2 mm OD 1 x PP tube connector 5.0 - 11.5mm ID 1 x GL14 connection for exhaust filter
-
Product Part
Description:
Tested to 10ppb for TOC, Certified Kit
-
Product Part
Description:
PP cap, centre hole, for 40mL vials, 72/pack
OUT OF STOCKPP cap, centre hole, for 40mL vials, 72/pack
